Rocker arm winding machine use safety tips everyone understand? Automated packaging solutions to tell you:
one Do not test the voltage between the PLC input point and the ground cable.
2. When the machine is in normal use, regularly check whether each connection part of the machine is loose or falling off. If so, be sure to tighten it.
3. Do not move or remove the upper and lower fixed limit blocks!
4. The cantilever of the machine should run in a counterclockwise direction. The swing arm of the machine automatically breaking the film should run in a clockwise direction.
5. Do not stand or stack anything under the film system!
6. When the film system roll is rotating, it is forbidden to reach inwards or into other objects to prevent damage to the rubber roll or fingers!
Seven. When the machine is running, the operator should stand in a safe place at a certain distance from the cantilever, and when the machine completes a working process and stops, it is close to the machine to prevent scattered injuries. If necessary, the safety isolation net should be installed (self-provided or customized).
8. It should be firmly grounded or connected to zero (zero ground shall not be mixed) to prevent leakage damage to the machine or personnel.
9. When the machine is moved to the original position, it should be re-installed and tested by professionals, and its safety performance should be tested before use.
10. Professional manufacturers of automatic production lines think that it is mainly to regularly check electrical and electrical connections, clean electrical cabinets, and pay attention to maintenance.
