Wrapping machine as a commonly used winding packaging machinery, the frequency of use is relatively high, through the winding machine to package, can greatly improve the work efficiency. Like other machinery, the winding packaging machine in the process of long-term use, will also produce certain wear or some failures, we should understand some maintenance common sense, in order to more smoothly use the winding packaging machine. Here is the intelligent packaging robot manufacturer to introduce some maintenance common sense of the winding packaging machine!
Tools/Materials
One winding machine
How much lubricating oil?
Methods/Steps:
1. Lubrication should be maintained between the inner and outer chains in the film frame of the wrapping machine. If the film frame moves up and down, it can be eliminated by tensioning the chain.
2. When the turntable is slow or slipping, first open the turntable motor cover, loosen the four connection bolts on the deceleration mounting plate, and then evenly adjust the two tension bolts clockwise to achieve the required tight tension, the machine should adjust the chain tension in 10-15 days of continuous use.
3. When placing the package of goods, it should be moved as smoothly and gently as possible to avoid deformation of the chassis or shortening the life of the parts.
4. Lift, chassis and film frame drive is through the turboworm governor to complete the speed change, in the use of the process, please click the requirements to use: 1) the use of oil-lubricated reducer, immersion depth of the worm under the turbine or the side, for the worm full tooth height; The upper one is 1/3 of the outer diameter of the worm; 2) The oil mirror is 1/2 of the oil mirror, and the center distance a=63mm is recommended to add 400ml; 3) Replace the new oil after 7-14 days of operation, and then replace it once a year; 4) The ambient temperature should be -40-+40 degrees, and low freezing point lubricating oil should be used when it is lower than 0 degrees; 5) The gear reducer is lubricated by grease, and the grease is not replaced during use, or it is replaced according to the actual situation.
5. The goods shall not exceed the designed packaging height, otherwise, the packaging effect will be affected.
6. The goods should be placed within the range of the turntable. If the goods are too large, they should be operated within 100mm or according to the actual space of the machine, otherwise the machine may be damaged.
7. Close the electric cabinet, clean and check the electrical parts and electrical connections regularly to ensure the normal use of the equipment.
Note:
The automatic packing and sealing system tells you that the winding packaging machine and other machinery, long-term use will cause a certain amount of wear, if you do not pay attention to maintenance, not only will increase the frequency of failure, but also shorten the service life of the winding packaging machine.
